Get Your Perfect Fit
Share your measurements once. Reorder your perfect fit forever.
What are you ordering?
How to Measure an Existing Pair of Pants
Find a pair of pants that fits you well. Iron them flat before measuring. If the pants have pleats, measure with the pleats closed — do not stretch them open.
1 Waist
Lay flat. Measure straight across the top of the waistband from one side to the other.
2 Hip
Locate the bottom of the fly. Move up ½ inch. Measure straight across.
3 Front Rise
Measure from the crotch seam straight up to the top of the front waistband.
4 Back Rise
Flip over. Measure from the crotch seam to the top of the back waistband.
5 Inseam
Measure from the crotch seam down the inside seam to the bottom hem.
6 Outseam
Measure from the top of the waistband along the side seam to the hem.
7 Thigh
2 inches below the crotch — measure straight across.
8 Knee
Fold the leg so the hem meets the crotch. Measure 1 inch above the fold line.
9 Bottom Opening
Measure straight across the bottom hem from edge to edge.
How to Measure Your Body for Pants
Stand naturally wearing fitted underwear. Keep the tape snug against your skin but not tight. Having someone help makes this easier.
1 Waist
Wrap the tape around your natural waist. Keep it level and snug — not tight.
2 Hip
Wrap the tape around the fullest part of your hips/seat. Keep it level.
3 Outseam
Stand on a flat surface. Measure from your waist down the outside of your leg to the floor.
4 Inseam
Stand with feet shoulder-width apart. Measure from the crotch straight down to the floor.
5 Rise
Run the tape from the front waist point through the crotch to the back waist point.
6 Thigh
Wrap the tape around the fullest part of your thigh about 2 inches below the crotch.
7 Knee
Wrap the tape around the center of your kneecap with your leg slightly bent.
Standard Pant Size Chart
Select your pant type and waist size to see the exact garment measurements we'll use. All measurements are in inches (half-width where noted).
| Waist | ½ Waist | Hip | Front Rise | Back Rise | Thigh | Knee | Bottom |
|---|
Send Us Pants to Replicate
If you have pants that fit perfectly, send them to us. We'll measure professionally, create your pattern, and return the garment with your order.
1. Place Your Order
Select "Send a Garment" as your measurement method during checkout.
2. Ship Your Garment
Mail your garment to our workshop, or request our pickup service (+$40) for a prepaid label.
3. We Measure & Return
We measure the garment, save your pattern for future orders, and return it with your new custom garment.
Your garment is only measured — never altered or damaged. It will be safely returned with your order.
How to Measure an Existing Shirt
Find a shirt that fits you well. Lay it flat, button it up, and smooth out any wrinkles before measuring.
1 Collar / Neck
Lay flat and button the top button. Measure from the center of the collar button to the middle of the buttonhole.
2 Shoulders (Yoke)
Lay back facing up. Measure straight across from one shoulder seam to the other.
3 Chest
Measure straight across from armpit seam to armpit seam.
4 Waist
Measure straight across at the narrowest part of the body — about 8–9 inches below the armpit.
5 Bottom / Hip
Measure straight across the bottom hem from one side edge to the other.
6 Sleeve Length
Button up the shirt and lay it face-down. Measure from the center of the back yoke along the sleeve to the end of the cuff.
7 Bicep / Sleeve Width
Measure across the widest part of the sleeve about 1 inch below the armpit seam.
8 Shirt Length
Measure from the base of the collar to the bottom of the hem at center back.
How to Measure Your Body for Shirts
Wear fitted clothing or just underwear. Stand naturally. Having someone help with back measurements makes this easier.
1 Neck
Wrap the tape around the base of your neck just above the collarbone. Slide two fingers underneath for comfort.
2 Shoulders
Measure across your upper back from one shoulder bone point to the other.
3 Chest
Wrap the tape around the fullest part of your chest under your arms. Keep it level.
4 Waist
Wrap the tape around your natural waist — the narrowest part of your torso.
5 Bicep
Wrap the tape around the fullest part of your upper arm with arm relaxed at your side.
6 Wrist
Measure around your wrist at the bone where you want the cuff to sit.
7 Sleeve Length
From the shoulder bone point down over the elbow to the wrist bone. Arm slightly bent.
8 Shirt Length
From the base of the side neck straight down to where you want the shirt hem to end.
Standard Shirt Size Chart
Select your preferred fit and sizing method to see garment measurements.
| Collar | Chest | Waist | Bottom | Yoke | Biceps | Cuff | Length |
|---|
Send Us Shirts to Replicate
If you have a shirt that fits perfectly, send it to us. We'll measure professionally, create your pattern, and return the garment with your order.
1. Place Your Order
Select "Send a Garment" as your measurement method during checkout.
2. Ship Your Garment
Mail your garment to our workshop, or request our pickup service (+$40) for a prepaid label.
3. We Measure & Return
We measure the garment, save your pattern for future orders, and return it with your new custom garment.
Your garment is only measured — never altered or damaged. It will be safely returned with your order.
How to Measure an Existing Jacket
Use a jacket that fits you well. Lay it flat and button it before measuring. Smooth out any wrinkles.
1 Shoulders
Lay back facing up. Measure straight across from one shoulder seam to the other.
2 Chest Width
Button closed. Measure straight across from armpit seam to armpit seam.
3 Midsection / Waist
Measure straight across at the waist button level.
4 Hip Width
Measure about 7 inches below the waist button from one side to the other.
5 Back Length
Lay back facing up. Measure from the collar junction straight down to the bottom hem.
6 Sleeve Length
Measure from the shoulder seam along the top of the sleeve to the cuff end.
How to Measure Your Body for a Jacket
Wear a thin, fitted layer. Stand naturally with arms at your sides. Having a helper is strongly recommended.
1 Chest Circumference
Wrap the tape around the fullest part of your chest under your arms. Keep it level all the way around.
2 Waist Circumference
Wrap the tape around your natural waist — the narrowest point of your torso. Stand naturally.
3 Hip Circumference
Wrap the tape around the fullest part of your hips/seat. Keep it level and parallel to the floor.
4 Shoulders
Measure straight across your upper back from one shoulder bone point to the other.
5 Sleeve
From the shoulder bone point down over the elbow to where you want the jacket sleeve to end.
6 Front Length
From the base of the side neck straight down the front to where you want the jacket hem to end.
Standard Jacket Size Chart
Select your fit and length to see garment measurements. All measurements in inches.
| Size | Shoulder | Chest | Midsection | Hip | Back Length | Sleeve | Bicep | Opening |
|---|
Send Us Jackets to Replicate
If you have a jacket that fits perfectly, send it to us. We'll measure professionally, create your pattern, and return the garment with your order.
1. Place Your Order
Select "Send a Garment" as your measurement method during checkout.
2. Ship Your Garment
Mail your garment to our workshop, or request our pickup service (+$40) for a prepaid label.
3. We Measure & Return
We measure the garment, save your pattern for future orders, and return it with your new custom garment.
Your garment is only measured — never altered or damaged. It will be safely returned with your order.
How to Measure for a Suit
A suit requires measurements for both the jacket and trousers. You can use garments from different sources — they don't need to be from the same suit. Refer to the Jackets and Pants guides above for step-by-step instructions with images.
Body Measurements for a Suit
Follow the Jacket body guide for your upper body, then the Pants body guide for your lower body. Combined, this gives us everything we need to create both garments.
Standard Suit Size Charts
Jacket and trousers are sized separately. Select your preferences below.
Jacket Sizes
| Size | Shoulder | Chest | Midsection | Hip | Back Length | Sleeve | Bicep | Opening |
|---|
Trouser Sizes
| Waist | ½ Waist | Hip | Front Rise | Back Rise | Thigh | Knee | Bottom |
|---|
Send Us Suits to Replicate
You can send a jacket, trousers, or both. They don't need to be from the same suit — just garments that each fit well individually.
1. Place Your Order
Select "Send a Garment" as your measurement method during checkout.
2. Ship Your Garment
Mail your garment to our workshop, or request our pickup service (+$40) for a prepaid label.
3. We Measure & Return
We measure the garment, save your pattern for future orders, and return it with your new custom garment.
Your garment is only measured — never altered or damaged. It will be safely returned with your order.
Pro Tips for Better Measurements
Measure Twice
Take each measurement twice and compare. If the numbers differ by more than ½″, measure a third time.
Measure at the Right Time
Body measurements can change throughout the day. Measure when you'll typically be wearing the garment.
Iron Before Measuring
If measuring an existing garment, iron it flat first. Wrinkles can add 0.5″–1″ of error.
When in Doubt, Ask Us
Not sure about a measurement? Send us a photo of how you're holding the tape. Our fit experts will confirm or correct it. Email us at mail@luxire.com.
Don't Worry About Perfection
If anything is off, we'll remake it at no cost. That's the Luxire 100% Fit Guarantee.
Keep Pleats Closed
When measuring pleated pants, always measure with the pleats folded closed — never stretched open.